Output Shaft, A/T

Thrust Washer/Spacer/Snap-Ring Dimensions
Output Shaft Thrust Plate (Output Shaft Pilot Hub) 1.3 - 1.4 mm (0.052 - 0.054 in.)
1.5 - 1.6 mm (0.060 - 0.063 in.)
2.1 - 2.2 mm (0.083 - 0.086 in.)
Output Shaft Thrust Washer (Rear Clutch Hub) 1.5 - 1.6 mm (0.060 - 0.062 in.)
1.7 - 1.8 mm (0.068 - 0.070 in.)
2.1 - 2.2 mm (0.83 - 0.86 in.)