Upper Control Arm

UPPER CONTROL ARM

REMOVAL
1. Raise and support the vehicle.





2. Remove the parking brake cable/bracket and ABS wiring bracket from the arm if equipped.
3. Remove the upper suspension arm nut and bolt from the axle bracket.
4. Remove the nut and bolt from the frame rail bracket and remove the upper suspension arm.

INSTALLATION
1. Position the upper suspension arm in the axle bracket and frame rail bracket.
2. Install the bolts and finger tighten the nuts.
3. Install the parking brake cable/bracket and ABS wiring bracket on the arm if equipped.
4. Remove the supports and lower the vehicle.
5. Tighten the upper suspension arm frame rail bracket bolt to 75 Nm (55 ft. lbs.).
6. Tighten the upper suspension arm axle bracket nut to 75 Nm (55 ft. lbs.).