Hood Ajar Switch Bracket Replacement

REMOVAL
1. Remove the hood ajar switch from the mounting bracket. (Refer to VEHICLE THEFT SECURITY/HOOD AJAR SWITCH - REMOVAL).
2. If necessary, remove and set aside the engine air cleaner housing for access to the hood ajar switch mounting bracket screws.

Fig.7 Hood Ajar Switch Bracket Remove/Install:

3. Remove the two screws that secure the hood ajar switch bracket to the right fender inner shield.
4. Remove the hood ajar switch bracket from the right fender inner shield.

INSTALLATION
1. Position the hood ajar switch bracket onto the right fender inner shield.
2. Install and tighten the two screws that secure the hood ajar switch bracket to the right fender inner shield. Tighten the screws to 7 Nm (60 in. lbs.).
3. If removed, reinstall the engine air cleaner housing.
4. Reinstall the hood ajar switch into the mounting bracket. (Refer to VEHICLE THEFT SECURITY/HOOD AJAR SWITCH - INSTALLATION).