A/C Liquid Hose/Line Replacement

REMOVAL

WARNING: REVIEW THE WARNINGS AND CAUTIONS IN THE FRONT OF THIS SECTION BEFORE PERFORMING THE FOLLOWING OPERATION.

1. Disconnect and isolate the battery negative cable.
2. Recover the refrigerant.

Fig.8 Liquid Line Remove/Install:

3. Disconnect the liquid line refrigerant line couplers at the evaporator inlet and the condenser outlet. Install plugs in, or tape over all of the opened refrigerant line fittings.
4. Remove the liquid line from the vehicle.

INSTALLATION

WARNING: REVIEW THE WARNINGS AND CAUTIONS IN THE FRONT OF THIS SECTION BEFORE PERFORMING THE FOLLOWING OPERATION.

1. Remove the tape or plugs from the refrigerant line fittings on the liquid line, the evaporator inlet and the condenser outlet. Connect the liquid line to the evaporator inlet and condenser outlet refrigerant line couplers.
2. Connect the battery negative cable.
3. Evacuate the refrigerant system.
4. Charge the refrigerant system.