Rear Seat Back
SEAT BACK - REARREMOVAL
60/40 Split Seat - Left
1. Remove the outer seat belt anchors.
2. Remove the outer seat anchor nut.
3. Remove the front seat cushion hinge bolt.
4. Remove the center seat back hinge bolts and separate the rear seat assembly.
5. Release the clips and remove the seat back hinge covers.
6. Lift the seat cushion cover and remove the hinge bolts.
7. Remove the seat back.
60/40 Split Seat - Right
1. Remove the outer seat belt anchors.
2. Remove the outer seat anchor nut.
3. Remove the inner seat belt buckles.
4. Remove the front seat cushion hinge bolt.
5. Remove the center seat back hinge bolts and separate the rear seat assembly.
6. Remove the center seat belt anchor.
7. Remove the remaining outer and inner seat anchor bolts.
8. Release the clips and remove the seat back hinge covers.
9. Lift the seat cushion cover and remove the hinge bolts.
10. Remove the seat back.
INSTALLATION
60/40 Split Seat - Left
1. Install the seat back.
2. Install the seat back hinge bolt and tighten to 8 N.m (71 in.lbs.).
3. Position the seat back hinge covers and fully seat the clips.
4. Connect the seat halves and install the center seat back hinge bolts.
5. Tighten the bolts to 28 N.m (21 ft.lbs.).
6. Install the front seat cushion hinge bolt and tighten to 28 N.m (21 ft.lbs.).
7. Install the outer seat anchor nut and tighten to 35 N.m (26 ft.lbs.).
8. Install the outer seat belt anchors.
60/40 Split Seat - Right
1. Install the seat back.
2. Install the seat back hinge bolt and tighten to 8 N.m (71 in.lbs.).
3. Position the seat back hinge covers and fully seat the clips.
4. Connect the seat halves and install the center seat back hinge bolts.
5. Tighten the bolts to 28 N.m (21 ft.lbs.).
6. Install the front seat cushion hinge bolt and tighten to 28 N.m (21 ft.lbs.).
Seat Installation
1. Install the outer and inner seat anchor nuts and tighten to 62.5 N.m (46 ft.lbs.).
2. Install the inner seat belt buckles.
3. Install the center seat belt anchor.
4. Install the outer seat belt anchors.