Power Window Switch: Service and Repair

REMOVAL
Front
1. Disconnect and isolate the battery negative cable.

Front Window Switch:

2. Using a trim stick, gently pry the switch from the console.
3. Disconnect electrical harness connector.

Rear
1. Disconnect and isolate the battery negative cable.

Rear Window Switch:

2. Using a trim stick, gently pry the switch from the console.
3. Disconnect electrical harness connector.

INSTALLATION
Front
1. Connect electrical harness connector to switch. Slide connector lock into position.
2. Install switch into opening in console and press into place.
3. Connect battery negative cable.

Rear
1. Connect electrical harness connector to switch.
2. Install switch into opening in console and press into place.
3. Connect battery negative cable.