Grille: Service and Repair

GRILLE

REMOVAL




1. Release the upper clips (3 and 4).




2. Roll the grille (2) forward and disengage the two grille hooks (5) under the headlamp units.
3. Lift the grille forward and up off of the location tabs at the bottom and remove.

NOTE: The procedure to remove the Renegade grille (3) is similar to the standard grille shown above.

INSTALLATION




1. Install the grille (2) onto the locating tabs (5) at the bottom.




2. Push the grille back and snap the hooks (3 and 4) onto the grille opening reinforcement (1).

NOTE: The procedure to install the Renegade grille (3) is similar to the standard grille shown.