Right Side

REMOVAL - RIGHT SIDE
1. Raise and support the vehicle.
2. Remove the right side tire and wheel assembly.
3. Remove the upper ball joint nut.
4. Separate the upper ball joint from the steering knuckle using tool C-4150A.
5. Lower the vehicle.
6. Remove the air box.
7. Remove the cruise control servo mounting nuts.
8. Remove the upper control arm rear bolt.
9. Remove the upper control arm front bolt.
10. Remove the upper control arm from the vehicle.

INSTALLATION - RIGHT SIDE
1. Install the upper control arm to the vehicle.
2. Install the upper control arm front bolt. Tighten the bolt to 122 Nm (90 ft. lbs.).
3. Install the upper control arm rear bolt. Tighten the bolt to 122 Nm (90 ft. lbs.).
4. Install the cruise control servo mounting nuts.
5. Install the air box.
6. Install the upper ball joint nut. Tighten the nut to 81 Nm (60 ft. lbs.).
7. Install the right side tire and wheel assembly.
8. Lower the vehicle.
9. Set the toe and center the steering wheel.