System Specifications

GENERAL SPECIFICATIONS
Transmission Type ............... 4-Speed Automatic, Electronically Controlled, Fully Adaptive, Electronically Modulated Torque Converter
Lubrication Method Pump (internal - external gear type)
Cooling Method Water Heat Exchanger and/or Air-to-Oil Heat Exchanger

GEAR RATIOS
1st Gear 2.84:1
2nd Gear 1.57:1
3rd Gear 1.00:1
4th Gear (Overdrive) 0.69:1
Reverse Gear 2.21:1

BEARING PRELOAD (DRAG TORQUE)
Output Shaft 0.22 - 0.903 mm (1 - 8 in. lbs.)

CLUTCH PACK
Low/Reverse Clutch (Select Reaction Plate) 0.84 - 1.60 mm (0.033 - 0.063 in.)
2/4 Clutch (No Select) 0.76 - 2.64 mm (0.030 - 0.104 in.)
Reverse Clutch (Select Snap Ring) 0.89 - 1.37 mm (0.035 - 0.054 in.)
Overdrive Clutch (No Select) 1.07 - 3.25 mm (0.042 - 0.128 in.)
Underdrive Clutch (Select Reaction Plate) 0.94 - 1.50 mm (0.037 - 0.059 in.)

INPUT SHAFT
End Play 0.12 - 0.63 mm (0.005 - 0.025 in.)

OIL PUMP CLEARANCES
Outer Gear-to-Crescent 0.060 - 0.298 mm (0.0023 - 0.0117 in.)
Inner Gear-to-Crescent 0.093 - 0.385 mm (0.0036 - 0.0151 in.)
Outer Gear-to-Pocket 0.089 - 0.202 mm (0.0035 - 0.0079 in.)
Outer Gear Side Clearance 0.020 - 0.046 mm (0.0008 - 0.0018 in.)
Inner Gear Side Clearance 0.020 - 0.046 mm (0.0008 - 0.0018 in.)

TORQUE SPECIFICATIONS
Converter-to-Driveplate Bolt 88 Nm (65 ft. lbs.)
Fluid Filter-to-Valve Body Bolt 5 Nm (45 in. lbs.)
L/R Clutch Retainer-to-Case Bolt 5 Nm (45 in. lbs.)
Adapter/Extension Housing Bolt 54 Nm (40 ft. lbs.)
Manual Valve Lever-to-Manual Valve Bolt 5 Nm (45 in. lbs.)
Oil Pan-to-Case Bolt 20 Nm (14.5 ft. lbs.)
Oil Pump-to-Case Bolt 30 Nm (22 ft. lbs.)
Park Sprag Retainer Bolt 4.5 Nm (40 in. lbs.)
Reaction Shaft Support Halves Bolt 28 Nm (250 in. lbs.)
Solenoid/Pressure Switch Assy-to-Valve Body Bolt 5.5 Nm (50 in. lbs.)
Valve Body-to-Case Bolt 12 Nm (105 in. lbs.)
Valve Body-to-Transfer Plate Bolt 5 Nm (45 in. lbs.)
Cooler Line Fitting 47.5 Nm (35 ft. lbs.)
Output Shaft Nut 271 Nm (200 ft. lbs.)
Pressure Tap Plug 5 Nm (45 in. lbs.)
Input Speed Sensor-to-Case Bolt 9 Nm (80 in. lbs.)
Output Speed Sensor-to-Case Bolt 9Nm m(80 in. lbs.)