System Specifications

Cylinder Head Camshaft Bearing Bore Diameter
Journals No. 1 - 6 26.020 - 26.041 mm (1.024 - 1.025 inch)
Cylinder Head
Material Cast Aluminum
Gasket Thickness (Compressed) 0.71 mm (0.028 inch)
Exhaust Manifold to Cylinder Head-Bolts 23 Nm (200 inch lbs.)
For specifications regarding Camshaft Bearing Cap bolts, refer to service procedure. Procedures
For specifications regarding Cylinder Head bolts, refer to service procedure.
For specifications regarding Cylinder Head Cover - Bolts, refer to service procedure. Service and Repair
For specifications regarding Intake Manifold bolts, refer to service procedure. Service and Repair