Speaker: Service and Repair

FRONT DOOR

REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the front door trim panel.

Front Door Speaker:

3. Remove the speaker mounting fasteners.
4. Remove the speaker (1) from the door and disconnect the wire harness connector.

INSTALLATION
1. Connect the wire harness connector and install the speaker to the door.
2. Install the speaker mounting screws. Tighten to 2 N.m (20 in.lbs.).
3. Install the front door trim panel.
4. Connect the battery negative cable.

INSTRUMENT PANEL

REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the A-pillar trim.
3. Remove instrument panel top cover.

Instrument Panel Speaker:

4. Remove speaker mounting fasteners.
5. Remove speaker (1) and disconnect the wire harness connector.

INSTALLATION
1. Connect wire harness connector and install speaker.
2. Install speaker mounting screws. Tighten to 2 N.m (20 in.lbs.).
3. Install instrument panel top cover.
4. Install the A-pillar trim.
5. Connect the battery negative cable.

REAR DOOR

REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the rear door trim panel.

Rear Door Speaker:

3. Remove the speaker mounting fasteners.
4. Remove the speaker (1) from the door and disconnect the wire harness connector (3).

INSTALLATION
1. Connect the wire harness connector and install the speaker to the door.
2. Install the speaker mounting screws. Tighten to 2 N.m (20 in.lbs.).
3. Install the rear door trim panel.
4. Connect the battery negative cable.