Rear Transponder

REAR TRANSPONDER

Removal
1. Raise and support the vehicle.





2. Drill out the rivets (2) for the transponder mounting bracket (1) (Fig. 34).
3. Disconnect the electrical connector (3) (Fig. 34).





4. Pull the transponder (1) with the bracket down and remove the mounting nuts (2) for the transponder (1) (Fig. 35).
5. Remove the transponder (1) from the bracket (3) (Fig. 35).

Installation





1. Install the transponder (1) to the bracket (3) and install the mounting nuts (2) (Fig. 37).





2. Reconnect the electrical connector (4) to the transponder (3) (Fig. 38).
3. Install the transponder/bracket assembly (1) to the vehicle and install new rivets (2) (Fig. 38).
4. Lower the vehicle.