Rear

REAR WHEEL SPEED SENSOR

REMOVAL
1. Raise vehicle on hoist.
2. Disconnect the sensor wire harness.





3. Remove mounting stud (2) from the sensor (3) (Fig. 3).
4. Remove sensor (3).

INSTALLATION
1. Connect harness to sensor (3). Be sure seal is securely in place between sensor and wiring connector.
2. Install O-ring on sensor (if removed).
3. Insert sensor (3) in differential housing (1).





4. Install the sensor mounting stud (2) and tighten to 9 Nm (80 inch lbs.) (Fig. 4).
5. Install the sensor electrical connector.
6. Lower vehicle.