Occupant Classification Module Configuration Mismatch

Test 1 - 2:

Test 3 - 5:

Test 5:

SYMPTOM
OCM CONFIGURATION MISMATCH

WHEN MONITORED
At Ignition on the Airbag Control Module monitors the PCI Bus messages for OCM PCI Bus messages and then compares the messages to the ACM configuration.

SET CONDITION
The DTC will be set if the ACM is not configured for PASSENGER ONLY OCM and the Occupant Classification Module messages are on PCI Bus.

POSSIBLE CAUSES
- ACM not configured for side airbags
- ACM, OCM configuration
- ACM, squib configuration
- Stored code or intermittent condition
- Active code present