Operation CHARM: Car repair manuals for everyone.

Lateral Accelerometer: Service and Repair

SENSOR-DYNAMICS

REMOVAL





1. Remove the center console.
2. Disconnect electrical connector (2) from the dynamics sensor (3).
3. Remove the two nuts (1) securing the sensor to the floor.
4. Remove the sensor (3).

INSTALLATION





1. Install the dynamics sensor (3) to the vehicle.
2. Install the electrical connector (2) making sure that the connector is fully seated into the sensor (3)
3. Install the two retaining nuts (1) and tighten to 9 Nm (80 inch lbs.).
4. Install the floor console.