Fascia Mounted
LAMP - FASCIA MOUNTEDREMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the grille panel from the front of the grille opening reinforcement.
3. Disconnect the front fog lamp pigtail wire from the connector on the grille opening reinforcement.
4. Remove the screw (1) from the mounting bracket that secures the fog lamp (2) to the bracket on the top of the front bumper fascia.
5. Remove the lamp from the top of the fascia
INSTALLATION
1. Position the front fog lamp (2) to the bracket on the top of the front bumper fascia.
2. Install and tighten the screw (1) into the mounting bracket that secures the lamp to the fascia. Tighten the screw to 20 N.m (15 ft. lbs.).
3. Reconnect the lamp pigtail wire to the connector on the grille opening reinforcement.
4. Reinstall the grille panel onto the front of the grille opening reinforcement.
5. Reconnect the battery negative cable.
6. Confirm proper front fog lamp alignment.