Rear

SENSOR - WHEEL SPEED-REAR

REMOVAL





1. Raise and support the vehicle.
2. Remove the wheel speed sensor mounting bolt (2) from the rear support plate (1).
3. Remove the wheel speed sensor from the support plate (1).
4. Disconnect the wheel speed sensor electrical connector.

INSTALLATION





1. Insert the wheel speed sensor (2) through the support plate (1).
2. Tighten the wheel speed sensor bolt (2) to 12 - 14 Nm (106 - 124 inch lbs.).
3. Secure the wheel speed sensor wire to the routing clips. Verify that the sensor wire is secure and clear of the rotating components.
4. Reconnect the wheel speed sensor electrical connector.
5. Lower the vehicle.