Removal

ADJUSTABLE PEDALS

NOTE: If possible put the pedals in the full forward position.

1. Disconnect the negative battery cable.
2. Remove the power brake booster .




3. Remove the 2 intermediate shaft bearing nuts (1).
4. Remove the lower steering shaft pinch bolt.
5. Remove the lower steering shaft off the column.
6. Lock the steering wheel into place.
7. Disconnect the pedal motor electrical connector.




8. Disconnect the accelerator pedal cable.
9. Disconnect the 2 upper brake pedal mounting nuts (4).




10. Loosen the brake pedal sled (1) upper nuts
11. Remove the brake pedal/accelerator pedal assembly (2&3) from the vehicle.