Lamp - Front

LAMP - FRONT





1. Disconnect and isolate the battery negative cable.

2. Using a small thin-bladed screwdriver, gently pry the switch end of the reading lamp lens (2) away from the lamp housing (1) far enough to unsnap the switch end of the lens from the housing. The switch end of the lens is identified by a tactile concave depression (3).





3. Swing the switch end of the lens (1) out and away from the lamp housing (2) until it is perpendicular to the lamp.

4. Pull the lens hinge/retainer (3) end of the housing outward from the headliner far enough to disconnect the wire harness connector (4) from the back of the lamp.

5. Slide the hinge/retainer end of the housing rearward from the mounting hole far enough to disengage the fixed retainer on the switch end of the housing from the headliner.

6. Remove the lamp from the vehicle.