Removal

REMOVAL




1. Disconnect and isolate the negative battery cable.

2. Disconnect the rear door wire harness connector from the body wire harness.

3. Using a grease pencil or equivalent, mark the location of the rear door hinges (2 and 3) on the B-pillar.

4. Support the rear door with a suitable lifting device and remove the five bolts (1 and 4) that secure the rear door hinges to the B-pillar.

5. Carefully remove the door from the body.

6. If required, remove the rear door hinges from the door (Refer to 23 - BODY/DOORS - REAR/HINGE - REMOVAL).