Removal

REMOVAL





WARNING: Do not disconnect the support rod cylinders with the liftgate closed. The support rod pistons are operated by high pressure gas. This pressure could cause damage and/or personal injury if they are removed while the pistons are compressed.

1. Open and support the liftgate.

2. Using a trim stick C-4755 or equivalent, remove the upper rear headliner trim.




3. Remove the support struts (1) from the liftgate.




4. Disconnect the wire harnesses and the washer hose.

5. Using a grease pencil or equivalent, mark the hinge location.

6. Remove the liftgate to body fasteners (2 and 3) and remove liftgate from vehicle.