Auto Door Locks Inoperative

*AUTO DOOR LOCKS INOPERATIVE

For a complete wiring diagram refer to Diagrams/Electrical.





Diagnostic Test

1. READ AUTO DOOR LOCK STATUS ON SCAN TOOL

With the scan tool select: "Body Controller", "Miscellaneous", "Auto Door Locks"

Does the scan tool show "Auto Door Locks: ENABLED"?

Yes

- Go To 2

No

- With the scan tool, enable the Auto (Rolling) Door Locks, open and close the driver door at least once and retest the System.
- Perform BODY VERIFICATION TEST - VER 1. Body Verification Test

2. CHECK DOOR AJAR STATES

Ensure all doors are closed.

With the scan tool read all DOOR AJAR states

Do any door ajar states show CLOSED?

Yes

- Refer to symptom list for problems related to DOOR AJAR.
- Perform BODY VERIFICATION TEST - VER 1. Body Verification Test

No

- Go To 3

3. CHECK FOR PCM DTC's

With the scan tool read "Engine" DTC's.

Are there any TPS DTC's present?

Yes

- Refer to symptom list for problems related to DRIVEABILITY..
- Perform BODY VERIFICATION TEST - VER 1. Body Verification Test

No

- Replace the Body Control Module.
- Perform BODY VERIFICATION TEST - VER 1. Body Verification Test