Lamp - Fascia Mounted

LAMP - FASCIA MOUNTED




1. Position the front fog lamp (2) to the bracket on the top of the front bumper fascia.

2. Install and tighten the screw (1) into the mounting bracket that secures the lamp to the fascia. Tighten the screw to 20 Nm (15 ft. lbs.).

3. Reconnect the lamp pigtail wire to the connector on the grille opening reinforcement.

4. Reinstall the grille panel onto the front of the grille opening reinforcement.

5. Reconnect the battery negative cable.

6. Confirm proper front fog lamp alignment