Operation CHARM: Car repair manuals for everyone.
Home >> Jeep Truck >> 2007 >> Liberty 2WD V6-3.7L VIN K >> Repair and Diagnosis >> Starting and Charging >> Power and Ground Distribution >> Relays and Modules - Power and Ground Distribution >> Relay Box >> Service and Repair >> Junction Block >> Installation >> Installation - LHD

Installation - LHD






INSTALLATION - LHD

NOTE: On vehicles equipped with a manual transmission, it will be helpful to depress the clutch pedal when installing the Junction Block under the instrument panel.

1. Position the junction block and install the four junction block retaining screws.

2. Install instrument panel wire harness on the lower channel of the instrument panel.

3. Working through the steering column opening cover, install the three bulkhead and two body controller electrical connectors on the junction block assembly.

4. Install the courtesy lamp under the left side of the instrument panel.

5. Install the left cowl trim panel on the vehicle.

6. Install the steering column opening cover.

7. Install the left outboard trim bezel on the instrument panel.

8. Install the left end cap on the instrument panel.

9. Connect the negative battery cable.
pro multis · About Operation CHARM