Flip-Up Glass Does Not Trip VTSS

*FLIP-UP GLASS DOES NOT TRIP VTSS

For a complete wiring diagram refer to Diagrams/Electrical





Diagnostic Test

1. CHECK FLIP-UP GLASS AJAR SWITCH FUNCTION

Verify that the lighting control on the multi-function switch is not in the Interior Lamps Defeat position.

Open the flip-up glass while observing the interior lamps.

Close the flip-up glass while observing the interior lamps.

Do the interior lamps function correctly with regard to the flip-up glass position?

Yes

- Go To 2

No

- Refer to Ajar Switch related diagnostic procedures.

2. CHECK FLIP-UP GLASS AJAR SWITCH STATUS WITH THE SCAN TOOL

NOTE: The VTSS must arm properly for the result of this test to be valid.

Turn the ignition on.

Open the flip-up glass.

With the scan tool in BCM, select Data Display and read the Flip-Up Glass Ajar Switch status for the driver door.

Does the scan tool display: CLOSED?

Yes

- Replace and program the BCM.
- Perform BODY VERIFICATION TEST - VER 1. Body Verification Test

No

- Refer to Ajar Switch related diagnostic procedures.