Removal

3.7L ENGINE

WARNING: Refer to the applicable warnings and cautions for this system before performing the following operation. Failure to follow the warnings and cautions could result in possible personal injury or death.






NOTE: LHD model shown. RHD model similar.

1. Disconnect and isolate the negative battery cable.

2. Recover the refrigerant from the refrigerant system.

3. Disconnect the wire harness connector (3) from the A/C pressure transducer (2) and, if required, remove the transducer from the A/C discharge line (4).

4. Remove the nuts (1 and 5) that secure the A/C discharge line to the A/C condenser (6) and the A/C compressor (7).

5. Disconnect the A/C discharge line from the A/C condenser and the A/C compressor and remove and discard the O-ring seals.

6. Install plug in, or tape over the opened discharge line fittings and the compressor and condenser ports.