Left Side

LEFT SIDE




1. Install the upper control arm to the vehicle.
2. Install the upper control arm front bolt (1). Tighten the bolt to 122 Nm (90 ft.lbs.).
3. Install the upper control arm rear bolt (2). Tighten the bolt to 122 Nm (90 ft.lbs.).
4. Reconnect the battery temperature sensor to the battery tray.
5. Install the battery tray.
6. Install the battery.
7. Reclip and mount the power center.




8. Install the upper ball joint nut. Tighten the nut to 81 Nm (60 ft.lbs.).
9. Install the left side tire and wheel assembly.
10. Lower the vehicle.
11. Perform a wheel alignment.