Removal

REMOVAL




Remove the engine cover.
1. Disconnect battery negative cable.
2. Remove air inlet tube (2) and air cleaner assembly (4).




3. Remove the nut (4) holding the crossover rod (2) to the shift lever. Be sure to use a wrench (1) to hold the ball stud to prevent it from rotating in the shift lever.




4. Loosen and remove shift tower ball for the shift detent (5).
5. Loosen and remove shift lock ball for the select detent (3).
6. Loosen and remove shift guide pin (2).




7. Remove the bolts holding the shift lever assembly to the transmission.




8. Remove the shift lever assembly from the transmission case.