Instrument Cluster
B210D-BATTERY VOLTAGE LOW (CLUSTER)
For a complete wiring diagram Consult Diagrams/Electrical.
- When Monitored:
With the ignition on.
- Set Condition:
The Instrument Cluster detects a battery voltage of 9.0 volts for 5 seconds.
Diagnostic Test
1. CHECK FOR ACTIVE DTC: B210D-BATTERY VOLTAGE LOW
Turn the ignition on.
Apply the vehicle park brake.
Shift the transmission into reverse.
With the scan tool, record and erase Instrument Cluster DTCs.
Wait 30 seconds.
With the scan tool, read Instrument Cluster DTCs.
Is DTC: B210D-BATTERY VOLTAGE LOW active?
Yes
- Go To 2
No
- The condition that caused this code to set is not present at this time. Check for an intermittent condition by inspecting the related wiring harness for chafed, pierced, pinched, and partially broken wires. Also inspect the related connectors for broken, bent, pushed out, spread, corroded, or contaminated terminals.
- Perform BODY VERIFICATION TEST - VER 1. Body Verification Test
2. VERIFY OPERATION OF THE VEHICLE CHARGING SYSTEM
NOTE: Troubleshoot any PCM charging/cranking DTCs before proceeding.
NOTE: Ensure the battery is fully charged.
Are any charging system DTCs present?
Yes
- Refer to appropriate testing.
No
- Replace the Instrument Cluster.
- Perform BODY VERIFICATION TEST - VER 1. Body Verification Test