Rear

REAR





1. Carefully position the rear park assist display (2) through the opening in the face of the headliner (1) with the connector receptacle oriented toward the left side of the vehicle.
2. With the display lens held flush against the face of the headliner, fold the retaining tabs (3) on each side of the display housing down flush against the headliner substrate.
3. Reconnect the wire harness connector (4) to the connector receptacle on the left end of the display housing.
4. Reinstall the trim onto both upper D-pillars. Installation.
5. Reinstall the trim onto the upper liftgate opening. .
6. Reconnect the battery negative cable.