Right

RIGHT





CAUTION: If new cylinder head bolts are used, do not lubricate the new cylinder head bolts. They already are coated with an anti scuff treatment.

Tighten cylinder head bolts following procedure below.
- Tighten M12 cylinder head bolts 1 through 8, in the sequence shown to 60 Nm (44 ft. lbs.).
- Tighten bolts 9 and 10 to 20 Nm ( 177 in. lbs.).
- Tighten 12 mm cylinder head bolts, 1 through 8, in sequence shown, an additional 90 degrees.
- Recheck and tighten M8 bolts 9 and 10 to 20 Nm ( 177 in. lbs.).
- And then again, tighten M12 cylinder head bolts, 1 through 8, in sequence an additional 90 degrees.