Front Hub / Bearing - Installation

INSTALLATION





1. Install the hub bearing (3) to the knuckle.
2. Install the hub bearing to knuckle and the 3 bolts then tighten to 115 Nm (85 ft. lbs.).
3. Install the wheel speed sensor Front Wheel Speed Sensor - Installation.
4. Install the wheel speed sensor nut (2).




5. Install the brake rotor (1) Brake Rotor - Installation.




6. Install the brake caliper adaptor (1) Disc Brake Caliper Adapter - Installation.




7. Install the caliper (1) Disc Brake Caliper - Installation.
8. Install the wheel and tire assembly Procedures.
9. Remove the support and lower the vehicle.