Right

REMOVAL - RIGHT SIDE

1. Disconnect battery negative cable.
2. Disconnect battery positive cable.
3. Remove the battery tray.
4. Drain cooling system Service and Repair.
5. Remove accessory drive belt Accessory Drive Belt - Removal.
6. Remove air conditioning compressor retaining bolts and move compressor to the left.
7. Remove heater hoses.
8. Disconnect injector and ignition coil connectors.
9. Disconnect and remove positive crankcase ventilation (PCV) hose.
10. Remove oil fill tube.
11. Un-clip injector and ignition coil harness and move away from cylinder head cover.
12. Remove right rear breather tube and filter assembly.
13. Remove cylinder head cover retaining bolts.
14. Remove cylinder head cover.

NOTE: The gasket may be used again, provided no cuts, tears, or deformation has occurred.