Torque Specifications

NOTE: Lubricate the bedplate retaining bolts with clean engine oil prior to installation.

When installing the bedplate retaining bolts, make sure to place the stud bolts in the correct location.

Torque the bolts in the sequence shown.

- Tighten bolts A - L to 54 Nm (40 ft. lbs.)
- Tighten bolts 1-10 to 2.8 Nm (25 in. lbs.)
- Turn bolts 1-10 an additional 90°.
- Tighten bolts A1- A6 to 27 Nm (20 ft. lbs.)