Vari-Lok Differential Carrier Bearings - Removal

REMOVAL





1. Install Plug SP 3289 (3) Into the differential axle shaft hole.
2. Remove differential case bearings with Puller 6444 (1), Puller Rods 6444-4 (2) and Puller Flange 6444-1(4). Position puller on the differential.





3. Position Puller (1) Jaws 9639 (2) around the case bearing and puller flange.





4. Position Puller (1) Collar 6444-8 (2) around the puller jaws.
5. Tighten the puller nut and remove differential case bearing.