Instrument Panel Duct - Installation

INSTALLATION

NOTE: LHD model shown in illustrations. RHD model similar.

NOTE: The driver side instrument panel duct is serviced only as an assembly with the inner driver side demister duct.





1. Position the passenger side instrument panel duct (2) onto the top of the instrument panel support.
2. Install the screw (1) that secures the passenger side instrument panel duct to the instrument panel support. Tighten the screw to 2.2 Nm (20 in. lbs.).





3. If removed, connect the outer demister duct (1) to the driver side demister duct (3).
4. Position the driver side instrument panel duct (6) and demister duct to the instrument panel support and connect the driver side instrument panel duct to the passenger side instrument panel duct (5). Make sure the ducts are fully engaged to each other.
5. Connect the demister hose (4) to the driver side demister duct. Make sure the hose is fully engaged to the duct.
6. Install the four screws (2 and 7) that secure driver side instrument panel duct and demister duct to the instrument panel support. Tighten the screws to 2.2 Nm (20 in. lbs.).
7. Install the lower and upper instrument panel covers Instrument Panel Cover - Installation.