Engine Torque Specifications

TORQUE






CYLINDER HEAD





Tighten bolts 1 - 10 27 Nm (20 ft. lbs.).
Verify that bolts 1 - 10 have all reached 27 Nm (20 ft. lbs.), by repeating step 1 without loosening the bolts.
Tighten bolts 11 - 14 14 Nm (89 in. lbs.).
Rotate bolts 1 - 10 an additional 90°.
Rotate bolts 1 - 10 an additional 90° again.
Tighten bolts 11 - 14 26 Nm (19 ft. lbs).


HEAD BOLT REUSE/REPLACE





The cylinder head bolts must be examined BEFORE reuse. If the threads are necked down (2) the bolts should be replaced.

INTAKE MANIFOLD






CAMSHAFT BEARING CAP






MAIN BEARING CAP





Tighten bolts 3 Nm (26 in. lbs.)
Tighten bolts 54 Nm (40 in. lbs.)
Rotate bolts 90°
Tighten bolts 23 Nm (20 ft. lbs.)


FLEX PLATE






OIL PUMP






EXHAUST MANIFOLD

Start at the center arm and work outward.


WATER PUMP