Exterior Handle - Installation

INSTALLATION





1. Install the exterior lift gate handle (1) to the lift gate (3).
2. Install the two nuts (4) and tighten to 8 Nm (6 ft. lbs.).
3. Connect the electrical connector (2).





4. Connect the latch cable (1) to the lift gate handle (2).





5. Align and install the trim panel (3) to the left gate (1), use hand pressure to seat all of the fasteners around the trim panel (3).
6. Install the two bolts (2) to the lower trim panel (3) and tighten to and tighten to 7 Nm (65 in. lbs.).