Cover - Installation

INSTALLATION




COVER ASSEMBLY BOWS





1. If necessary, install the header bows (6, 7). Lift Arm And Bow Assembly - Removal




HEADLINER BOWS





2. Install the headliner bows (2) in the correct sleeves (1).
3. Position the cover assembly top down on a bench and position the headliner onto the cover.





4. Place the lift arms and bows into the bow sleeves.

NOTE: Always install new lift arms (1) when they have been separated from the bows (2).

5. Using a bar clamp or plastic hammer, install new lift arms (1) onto the bows (2) and seat fully.





6. Insert the lift arm support tabs (2) into the cover pockets (3).





7. Insert the headliner bows (2) into the cover pockets (3).





8. Connect the tension straps (3) to the hooks on the header bows (1).





9. Connect the tension cables (1) to the lift arm hooks (2) along both sides.
10. Install the cover assembly, Cover Assembly - Installation.