Rear

INSTALLATION

60/40 Seat Cushion - 60





1. Install the seat cover to the seat cushion.
2. Fold the seat cover back to access the hog ring locations and install new hog rings to the seat cushion and cover.
3. Install the cover and cushion together to the seat cushion frame.
4. Secure the front and rear J-straps (2, 4) fully.
5. Secure the seat cover plastic retaining clips (3) to the seat frame.





6. Position the front floor bracket assembly (1) onto the seat cushion assembly and install the bolts (2).
7. Tighten the bolts to 10 Nm (88.5 in. lbs.).





8. Seat the cable housing (1) fully.





9. Secure the seat cushion cover clips (1).





10. Position the 60 seat to the seat back frame.
11. Install the seat bolt (2) to the floor bracket (1) and seat frame on the left side of the 60 seat and tighten to 27.5 Nm (20 ft. lbs.).





12. Install the 60 seat pivot bolt (2) to the floor bracket (1) and seat frame and tighten to 27.5 Nm (20 ft. lbs.).





13. Install the 40 seat cushion (1), refer to 60/40 Seat Cushion - 40.

60/40 Seat Cushion - 40





1. Install the seat cover to the seat cushion frame.
2. Fold the seat cover back to access the hog ring locations and install new hog rings to the seat cushion and cover.
3. Install the cover and cushion together to the seat frame.
4. Secure the front and rear J-straps (2) fully.
5. Secure the seat cover plastic retaining clips (1) to the seat frame.





6. Install the seat cushion assembly (1) onto the pivot bolt and twist assembly down into the floor brackets fully.





7. Install the seat bolt (1) to the floor bracket (2) on the right side of the 40 seat and tighten to 27.5 Nm (20 ft. lbs.).





8. Connect the cable housing (1).





9. Secure the seat cushion cover clips (1).





10. Install the front bracket legs (2) onto the cushion assembly and install the bolts (1).
11. Tighten the bolts (1) to 10 Nm (88.5 in. lbs.).





12. Connect the cable.
13. Install the 60/40 rear seat. Seat - Installation