Front Hub and Bearing - Removal

REMOVAL

1. Raise and support the vehicle.
2. Remove the tire and wheel assembly.
3. Remove the caliper adapter Disc Brake Caliper - Removal.

CAUTION: Never allow the disc brake caliper to hang from the brake hose. Damage to the brake hose will result. Provide a suitable support to hang the caliper securely.

4. Remove the disc brake rotor Brake Rotor - Removal.
5. Remove the wheel speed sensor Front.




6. Remove the axle shaft nut. (if equipped with four wheel drive)
7. Remove the three mounting bolts (1) for the hub/bearing assembly.
8. Remove the hub/bearing.