Front Door Glass - Installation

INSTALLATION





1. Insert the narrow end of the glass (1) into the door through the opening between the inner and outer panels (2). Then engage the front edge of the glass into the front portion of the glass run weatherstrip before rotating the back edge of the glass rearward into the B-pillar portion of the weatherstrip.






NOTE: The glass should snap into place. Make sure the glass is secure to the liftplate by pulling up on the glass to verify.

2. Connect the door glass (1) to the window regulator (2) by sliding the glass down into the liftplate.





3. Apply the adhesive tape (1) to the inspection cover in the door carrier plate.





4. Install the inner door weatherstrip Front Door Weatherstrip - Installation.





5. Install the trim panel (4) to the door Front Door Trim Panel - Installation.