C2201

C2201-INTERNAL CONTROLLER

For a complete wiring diagram, refer to the wiring information Electrical Diagrams.

- When Monitored:
With the ignition on.

- Set Condition:
The Final Drive Control Module (FDCM) has detected a failure internal to the controller.





DTC IS ACTIVE
1. Ignition on, engine not running.
2. With the scan tool, read DTCs in the Final Drive Control Module.

Is the status Active for this DTC?

Yes

- Replace the Final Drive Control Module (FDCM).
- Perform TRANSFER CASE VERIFICATION TEST Transfer Case Verification Test.

No

- Test Complete