Vehicle Theft Security Siren - Removal

REMOVAL





1. Disconnect and isolate the battery negative cable.
2. Locate the alarm siren module (3) on the engine compartment side of the front end module carrier (1), just below the outboard side of the right front combination lamp unit housing (2).
3. Disconnect the front end module wire harness connector from the connector receptacle (4) for the siren.
4. Remove the right front combination lamp unit from the front of the vehicle. Front Lamp Unit - Removal.
5. From the front of the vehicle, remove the screw that secures the siren to the mounting tab of the front end module carrier located behind the right front combination lamp unit.
6. Remove the siren from the engine compartment side of the carrier.