Rear

REMOVAL

60/40 Seat Cushion - 40

CAUTION: Relieve the tension on the cable by positioning the seat correctly. Failure to relieve tension will result in damage to the cable.

1. Remove the 60/40 rear seat from the vehicle and place on a clean work bench, Seat - Removal.
2. Remove the seat bolt (1) from the floor bracket (2).

3. Disconnect the cable.

4. Remove the front bracket to the cushion bolts (1) to separate the forward legs to the cushion.

5. Separate the seat cushion cover (1) and expose the recliner cable.

6. Disconnect the cable housing (1).

7. Remove the seat cushion assembly (1) from the pivot bolt on the floor bracket.

8. Separate the seat cover plastic retaining clips (1, 2) from the seat frame.
9. Remove the cover and cushion together from the seat frame.
10. Fold the seat cover back to expose the hog rings, cut and remove all hog rings.
11. Remove the seat cover from the seat cushion.

60/40 Seat Cushion - 60

CAUTION: Relieve the tension on the cable by positioning the seat correctly. Failure to relieve tension will result in damage to the cable.

1. Remove the 40 seat cushion (1), refer to 60/40 Seat Cushion - 40.

2. Remove the pivot bolt (2) from the floor bracket (1).

3. Remove the seat bolt (2) from the floor bracket (1) on the left side of the 60 seat.
4. Remove the 60 seat from the seat back frame.

5. Release the seat cushion cover clips (1) from the seat cushion frame and expose the recliner cable.

6. Disconnect the cable housing (1).

7. Remove the front bracket to the cushion bolts (2) to separate the forward legs (1) to the cushion.
8. Remove the seat cushion assembly from the floor brackets.

9. Separate the remaining seat cover plastic retaining clips (3) from the seat frame.
10. Separate the J-straps (2, 4) from the seat cushion frame.
11. Remove the cover and cushion together from the seat frame.
12. Fold the seat cover back to expose the hog rings, cut and remove all hog rings.
13. Remove the seat cover from the seat cushion.