Electric Radiator Fan - Installation

ELECTRIC COOLING FAN




If the fan blade is bent, warped, cracked or damaged in any way, it must be replaced only with a replacement fan blade. Do not attempt to repair a damaged fan blade.

NOTE: For 3.7L Heavy Duty/Max Cool/Trailer Tow cooling package, the viscous fan cannot be removed separate from the shroud. Both fan and shroud must be removed together.

1. Install cooling fan to shroud. Tighten fan shroud to radiator bolts to 9 Nm (80 in. lbs.).
2. Install fan shroud assembly into the vehicle.
3. Install fan shroud to radiator mounting bolts (1). Tighten bolts to 9 Nm (80 in. lbs.).
4. Connect fan motor wire connector (2) to harness connector and attach connector to shroud.





5. Install the radiator hose retainer (3) to the electric fan shroud.
6. Install the transmission cooling line retainer bolt (2) to the electric fan shroud.










7. Install the viscous fan drive (if equipped). Electric Radiator Fan - Installation
8. Install the combination coolant recovery/washer fluid bottle.Coolant Recovery Bottle - Installation
9. Connect battery negative cable.
10. Start engine and check fan operation.