Instrument Cluster Bezel - Removal

REMOVAL





1. Before proceeding with the following repair procedure, review all warnings and cautions. Service Precautions
2. Separate the kneeblocker upper clips (1) and rotate the cover (2) down.





3. Slide the kneeblocker (1) over and disengage the hinges (3).





4. Using a trim stick C-4755 or equivalent, separate the center bezel upper clips (2) and center clips (3).
5. Rotate the upper part of the center bezel (1) down and disengage the lower clips (4).





6. Using a trim stick C-4755 or equivalent, separate the five cluster bezel clips (5) along the back edge of the driver side top cover (1).
7. Using a trim stick C-4755 or equivalent, separate the clips securing the top cover (1) to the passenger side top cover (3).
8. Pull the top cover (1) rearward and separate the front clips (6) securing the cover to the instrument panel and remove the cover.





9. Remove the A-pillar trim (3). A-Pillar Trim Panel-Removal






NOTE: Position the steering column to the lowest position to ease in the removal of the cluster bezel.

10. Remove the screw (1) and the cluster bezel (2).





11. Using a trim stick C-4755 or equivalent, separate the lower clips (2) and release the cluster bezel (1) from the instrument panel.