MP3022 Transfer Case

STANDARD PROCEDURE - FLUID DRAIN/REFILL

The fill and drain plugs are both in the rear case.










1. Raise vehicle. Ensure that the vehicle is level on the hoist.
2. Position drain pan under transfer case.
3. Remove fill plug (1) and drain plug (2) and drain lubricant completely.
4. Install drain plug (2) and tighten plug to 27 Nm (20 ft. lbs.).
5. Fill transfer case to bottom edge of fill plug opening with MOPAR(R) ATF+4
6. Install and tighten fill plug (1) and tighten plug to 27 Nm (20 ft. lbs.).
7. Lower vehicle.