Left Side

LEFT SIDE





1. Install the upper control arm to the vehicle.
2. Install the upper control arm front flag bolt (1). Tighten the nut (2) to 122 Nm (90 ft.lbs.). with full vehicle weight.
3. Install the upper control arm rear flag bolt. Tighten the nut to 122 Nm (90 ft.lbs.). with full vehicle weight.





4. Install the battery tray (1) Battery Tray - Installation.
5. Install the battery Battery - Installation.
6. Reclip and mount the power center (2).

7. Install the upper ball joint nut. Tighten the nut to 41 Nm (30 ft.lbs.) plus an additional 90° turn.
8. Install the left side tire and wheel assembly. Removal and Replacement.
9. Lower the vehicle.
10. Set the toe Service and Repair.