Left Side

LEFT SIDE






NOTE: All torques should be done with vehicle on the ground with full vehicle weight.

1. Position the lower suspension arm (2) in the frame rail (4).
2. Install the frame rail bracket bolt and nut (1). Tighten to 163 Nm (120 ft. lbs.). with full vehicle weight.
3. Position the lower suspension arm in the axle bracket.
4. Install the axle bracket bolt and nut. Tighten to 203 Nm (150 ft. lbs.). with full vehicle weight.
5. Install the fuel tank Fuel Tank - Installation.
6. Remove the supports and lower the vehicle.